Electrostatic separator

一、特点及用途：

1.适用于各类密度浮选法难以分选的混杂塑料。

2.分选ABS/PS、PA/PP、ABS/PC、PS/PET/PVC、PA/PE/PO等。

3.破碎粒单次分选准确率（纯度）可达98%以上，二次分选可以接近100%。

4.粉碎料尺寸要求宽松，20㎜以下的粉碎片都能轻松过机。

5.分选速度快，可达1000KG/小时（注：粉碎料中的粉末不能太多）。

6.干式分离模式无污染，没有任何环保压力，完全符合新环保法的要求。

7.成套设备为组合式结构，占地约50平方米。

1 Itis used in promiscuous plastics which are difficult to sort by densityflotation

2 Itcan sort ABS/PS, PA/PP, ABS/PC, PS/PET/PVC, PA/PE/PO, etc..

3Crushing material sorting accuracy (Purity) can reach more than 98%, the secondsorting can be close to 100%.

4Crushing material size is  below 20 mm .

5The sorting speed is up to 1000KG/H (Note: crushing powder in the material cannot be too much).

6Dry separation mode, no waste, no environmental pressure, and it is fully meetthe requirements of new environmental laws.

7 The set of equipment is combinedstructure, covering 50 square meters.